Menu
PRODUCTS
PRODUCTS
Ultrasonic Open Channel Flow Meter

YK-SUG

Ultrasonic Open Channel Flow Meter
Ultrasonic Open-Channel Flow Meter An ultrasonic open-channel flow meter consists of an ultrasonic probe for liquid level measurement and a flow calculation transmitter. Structurally, it can be either integrated (one-piece) or split-type (remote). It is suitable for measuring flow in open channels—such as rectangular, trapezoidal, or U-shaped flumes—in applications including reservoirs, rivers, hydraulic engineering projects, municipal water supply, wastewater treatment, agricultural irrigation, and water resource management. This type of flow meter must be used in conjunction with a calibrated weir or flume structure. Commonly used structures include Parshall flumes, rectangular weirs, and V-notch (triangular) weirs, allowing selection based on specific site conditions.
technology parameter
Structure FormIntegrated Type, Split TypeFixing MethodThread Fixing
Housing MaterialFlame Retardant ABSMeasuring Channel WidthTime Difference Method 0.5-10m
Measuring Range0.1m³/h-99999.99m³ (Determined by different weirs and flumes)Ambient Temperature-25 ~ 80℃
Process Temperature-25 ~ 60℃Applicable Pressure1.0 MPa, 1.6 MPa, 4.0 MPa (Negotiable)
Accuracy±1%Electrical InterfaceM20×1.5 (Negotiable)
Output Mode4~20mA, RS485Protection GradeIP66, IP68
CertificationIntrinsically Safe and FlameproofPower Supply Voltage220VAC, 24VDC, Battery, Solar Energy


Selection
  • Measurement Task
  • Nominal Diameter (DN)
  • Power Supply
  • Operating Temperature
  • Pressure Rating
  • Output Signal
  • Installation Type
  • Converter Type
  • Protection Rating (IP Rating)
  • Explosion-Proof Rating
  • Name
  • Company
  • Email